Pay in 4 interest-free payments of $10.50 Learn more
Ships within 48 hours · Estimated delivery Sep 27 - Oct 2
a PD27W USB-C power adapter is required
Equipped with momentary button for easy power control
Most common power input jack: 5
Reserved Side Slot(Interface) for GPIO/FFC Cable
configurable by software (up to 1920x1080)
Geekworm X1006 PCIe to 2.5" SATA HDD+M.2 SATA 2280 SSD Shield for Raspberry Pi 5 (NOT Support Boot from SSD) raspberry pi 3a a PD27W USB-C power adapterNote: The X1006 is designed for data storage purposes and does not support booting from HDD SSD with the existing firmware currently. Not compatible with M. 2 NVMe SSDs, M. 2 PCIe AHCI SSDs, or other M. 2 non SATA devices Older SATA drives with less efficient flash media may not perform as well as newer drives New SATA HDDs SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they
US$ 16.75
US$ 25.00
US$ 592.50
US$ 35.00
US$ 699.50
US$ 1200.00
US$ 61.00
US$ 224.50
US$ 15.99
US$ 17.00
US$ 22.00
US$ 77.00
US$ 252.50
US$ 32.00
