RCK40-32x60 Challenge Cone Clamping Element 32x60mm Sealed If the shaft is not

If the shaft is not sitting centrally

static 133kn

Double direction thrust ball bearings can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions

Place screws loosely in holes that are threaded on hub side

017235_Side bolt with nut

RCK40-32x60 Challenge Cone Clamping Element 32x60mm Sealed If the shaft is notShaftlock Cone Clamping Elements Cone clamping elements are a purely friction method of clamping components to a shaft. The internal components within a cone clamp operate on a taper, so as the cone clamp is tightened the internal diameter decreases while the outside diameter increases. This change in diameters creates the clamping force. There are two main advantages of cone clamps. The first is that for machining your component (i. e. a sprocket),